Cleveland Heights Drywall Repair
Home › What we fix › Holes and patches

Drywall Hole and Patch Repair in Cleveland Heights

Small hole or big opening. Plaster or drywall. We patch it flush and prime it for paint. Call, send a pic, get a window.

Holes and patches repair in a Cleveland Heights home

What these jobs look like

Doorknob holes. Old picture-hook holes. Toggle-bolt holes from a shelf that came down. A square opening where an electrician cut in to run new wire. A pipe chase where a plumber opened the wall and left.

Each one is a different size and wall type. Each one needs a different fix. We start by identifying what the wall is made of.

Cleveland Heights facts for hole repair

  • Wiring and plumbing upgrades

    Houses built in the 1910s and 1920s have often had wiring or plumbing updated. Those jobs leave openings in walls and ceilings. Our patches close them cleanly once the trades are done.

  • Plaster crumbles at the edge

    Colonial-style houses from the city's 1920s building boom were commonly plastered. A hole in plaster is not a clean cut. Edges can crumble and the plaster can crack beyond the hole. We cut back to solid material first.

  • Doubles with two sets of walls

    Two-family houses appear in nearly every Cleveland Heights neighborhood. Holes show up at move-outs in both units. We can handle both in one visit if the window allows.

  • Original trim stays

    In districts like Forest Hill (listed 1986) and Euclid Golf (listed 2002), owners care about casings and baseboard. We patch around them and protect them.

How a patch goes in

Time-ordered. Roughly one coat per drying stage.

  1. Cut back to solid material. Square up ragged edges.
  2. Back the opening if there is no framing behind it.
  3. Set a patch flush with the wall.
  4. Tape the joints and apply the first coat.
  5. Second and third coats, sanded smooth.
  6. Prime. Wipe dust. Done.

Big openings

Openings bigger than a hand need backing. We fix a support behind the hole so the patch has something solid to bond to. Then the patch, the tape, the coats. A large opening takes more than one visit because each coat dries before the next.

If the opening is from a recent upgrade, send a pic before the trades button it up. We tell you what we can do with the framing as it sits.

Holes we handle

  • Doorknob dents and punch-throughs.
  • Anchor and toggle holes.
  • Access holes cut for electricians and plumbers.
  • Old fixture openings left after a light or vent was removed.
  • Cable and cord holes that are no longer needed.

Matching texture

A flat patch on a textured wall stands out. Texture matching comes after the patch is set. We look at the wall in raking light, match the pattern and let it dry before priming.

Smooth plaster walls are different. They need the patch feathered wide so the eye does not catch the edge.

What to do before we arrive

Take down anything near the hole. Tell us what is behind it if you know. If you had wiring work done, say so. We will not patch an opening that an electrician or plumber still needs to inspect.

Quick answers

Can you patch a hole in plaster?

Yes. We cut back to solid material, patch and feather the edges.

Do you open walls for plumbers or electricians?

We repair the opening after they finish. We do not do their work.

How many visits does a patch take?

Small holes can be done in one visit with a return for priming if coats need dry time. Larger openings take more.

Will the patch match the texture?

We match what is on the wall. We look at it in side light first.

Get it fixed. Pick your window.

Call or text. Or send a pic and we reply with the next open window.

CallText